We just finished competing the CRSA 305 sprint series for the first time this year. Our goals for 2011 was to try for rookie of the year, (There were 4 other drivers in contention for rookie of the year title.) a win, and top ten in points. The goals were not only met with rookie of the year, a win at I-88 Speedway, we also won the point championship by one point at the last race at Orange County Speedway. The Triple X chassis performed great, it responded to even the smallest adjustment as many were made at the ten or so different tracks that we ran at. What a SUPER chassis. Thanks, VIRGILIO RACING

I ran with the URC 360 Sprintcars this past year and would like to thank everyone at Triple X racing for the help and support. I won rookie of the year this year and couldnt had done it with out the support from you all. The cars I ran this year were great I couldn't have asked for anything better. I am excited for the 2012 season and working with you all again.

Just wanted to say thanks again for helping out this year and have really enjoyed the new race car. It handles so well and we have been able to make changes and see it react! We are really getting the handle on it and in last four races have had (3) 3rds and a 1st. One of those I was making the pass for the lead and spun out and still came from the back to run 3rd, and this past weekend we won on Friday and Saturday was leading the feature and spit the brake pucks out of the rear caliper and had to limp it home and surrender the lead to Travis Rilat when I lost my brakes. But again just wanted to say Thank you for all you have done for my race team.

We run in the UK Sprint Car series,(England) mainly on asphalt. We started with the 88/40 Triple X at the start of the season this year and haven't looked back, winning the past four aspahlt feature finals and one dirt heat.

I wasnt driving our car I was driving Dennis Marshala’s but it is also XXX. I am so glad we switch to XXX, everytime we hit the track this year the car has been fast and it responds and works when we make changes. Thank you guys for all the help this year.

The car I sent you a picture of is an early 2008 model that was wrecked and we re-clipped it. That was only the third time in the car when we won! I love your cars and will continue to run them!

xxx ford focas midget salem indoor what a great car to race led all ten lap heat won led all 20 lap main won the car was so great to setup and race car stayed so good from start to finsh frist time in a triple x car i would tell you if your going to get in a midget to buy a triplex cars they are a super great fast car looking foward in going to race more for havlick motorsports buy triplex great deals

We have been running the new tripleX chassie this season and it has worked really well on oure tracks and we have been able to make a few changes to the car to get us up front the car is working awsome as last week we raced at carrick speedway and started the A main from 8th and after a few laps we were up to 5th as the car loves running were ever i put it on the track.
I am hoping to be able to buy another TripleX chassie for next season and that way we will have a good spare frame the same as we are racing.I just wanted to give you some feed back on how good we think the cars are as we are a small team with no sponsors or support and dad and i have put a relitively cheap car together and bean able to work with it and feel comfortable in making changes to the car and has helped me get up in the top ten early in the season and hope to run well in the feature events to come.

G day guys, i e mailed u a couple of months ago in regards to me changing my chassis manufactures to a xxx 600, well i ended up buying one through our dealer here in australia (rocket industeries) and i have got to say they have been absolutly awesome in dealing with couldnt ask for any better service then what they have provided to me.
anyway i am just sending this e mail to let u guys know in how happy i am with the car as i have run it the last two weekends in a row first weekend ran 2nd in it not bad for the first time the car touched dirt and last night we started our first round of our queensland series the car was on rails all night but finished 3rd in the 20 lap final and i reakon i could of done another 20laps, what a pleasure to drive, absolutly no regrets in changing chassis manufactures.
thanks guys

Car (600 Mini Sprint) is great, very fast, I feel capable of winning every night. I've raced at 7 different speedways this year.  I run a 06 GSXR 600 so I made my own motor plates, it works well I have an 08 newer design I'm going to run in 2010.

I've had so much fun and the car has taught me alot, I can free the car up to enter the corner and it really corners like nothing else and is at a large advantage over other cars.

Never drove a car that I loved this much. I also have enough room for my ultra shield containment seat.

Nothing but great things to say.

Just like to thank you Kaleb and everyone at XXX race co, for all the support and wicked fast racing chassis, this year enroute to winning the 2009 championship.

From day one our customer experience with XXX Race Components has been nothing short of extraordinary. From ordering to help with setup on our 2009 XXX Micro Sprint, everyone at XXX has done more than I have expected from driving other micro sprints in the past.

The quality of the race car and it's components, blows me away! I'm not saying this just to brag up the product, I am saying this as a skilled machinist who knows the difference.

The Service - Exceptional, down to earth, UP FRONT and HONEST about the products they sell.

Not to mention all this new XXX Micro wants to do is run up front and it responds very well to changes.

From buying my first part with XXX, to the deluxe chassis kit purchase I have nothing but great things to say about this company and the products they have to offer us.

Thank you for helping bring our race team to the next level!

I was involved in one of the most prolific crashes many have ever experienced at Devils Bowl Speedway in Mesquite, Texas on May 9th, 2009. I am including some photo's of before and after the accident of my brand new, and when I say BRAND NEW I mean every part on this car was BRAND NEW, Triple XXX ASCS sprint car. The wreck happened just past the flagstand while taking the green flag for an ASCS Lone Star Region heat race. I started on the outside of row 1 and as we passed the flagstand I was pinched into the wall with nowhere to go. My car endo'd and twisted 8 times to the end of turn one. I was knocked out briefly, but came out of the car virtually unscathed. I did have some sore neck and back muscles for a couple of weeks, but considering what my body went through, I was very fortunate that there wasn't any major injuries.

As I scroll through your website, it's very apparent that you build a winning product, BUT I wanted to commend Triple XXX for building a SAFE race car!! Although some of the tubes were bent, NOT ONE WELD WAS BROKEN OR CRACKED!! This is a testament to the safety and quality measures made to keep us drivers safe within your product.

I wrote you earlier about my sons win on 6/20 at Rattlesnake Motordrome with a XXX chassis. We ran again on Fri 6/26 at Canaan dirt Speedway, www.canaandirtspeedway.com . Shawn started 9th and the race went green to checker with no cautions, 25 laps. He got to 2nd and was making a move on the leader when he ran out of laps. This chassis is just great. He is able to put the car wherever he needs to to make passes. Just wanted you to know we are really happy with the car, thanks to XXX Chassis.

From your parts to a frame that I haven't been unsatisfied with anytime I've sat in it yet. I won my first career feature Sat. night the 23rd at Port Royal Speedway. This car is a rocket ship and looking forward to more. My XXX is the best car I've ever owned.

I Just finished my new xxx chassis on Saturday at 11am and went to Fonda speedway to the opener of the Empire Super Sprints (ESS) and finished twelfth. Was not totally comfortable in the car. Bought a new LaJoie seat and needed to make some adjustments. Did that and went to Utica-Rome Speedway the next day for another ESS show. Won my heat, won the dash and took the lead in the feature on lap 23 and going into the third turn for the checker flag, got taken out by a lap car and spun. The track was super dry slick and I had that car on rails! Just wanted to let you know how good it worked!

hi there, my name is chris muir i live in sydney and race sprintcars at parramatta city raceway i have raced part time for three seasons using a second hand maxim chassis bought off joey saldana with limited success - this season i purchased a new xxx chassis from rocket and have so far taken 4 tenths of a second off my quickest qualifing lap as well as running second in two heats of world series at parramatta - i qualified for my first a main in october which was not run. on the weekend of december 6th i won my heat and finished second in the feature i would like to say thankyou and would love to public display the great results i have acheived since switching to xxx.

Just wanted to update you on our season. Billy has been very impressed with the XXX Chassis that we purchased from you. He said he could make it do anything. The other drivers have been very surprised what it can do. We have been placing in the top 5 most of the year. The real test came Saturday night Sept. 27th when a Heim connecting the Drag Link broke and sent him into the wall at approx. 120 mph. The car sustained major damage but Billy was able to walk away. Just a few bruises and dislocated thumb. The XXX Chassis did its job! I cannot tell you how many people came over to our pits after the race in "Awe" of what the car looked like. We had many drivers say they were very impressed with the way the cock pit stood up to such an impact. I have even had a few tell me they are going to look into buying one for next season.

On a personal note our family would like to thank you and all the people involved with XXX for making such a superior product. Billy was lucky to walk away from such a devastating crash. Thank you for building a chassis that we can trust. We will be contacting you soon to order a new one.

I trust XXX chassis with my sons life and that says a lot coming from a "mom".
Diane ( Billy's mom and car owner. )

Great customer service!!! I contacted them about a problem with one of the casters on my sprint car stands, and was promptly contacted, and assured that they would send a new one at no charge. Thanks.

Jon wanted to thank Triple X Race Cars for their sponsorship this season ... "The quality of their parts and Chassis are nothing short of first rate, they make a great product and I would like to thank them for all they have done to help the URSS Series".

For the first time in many years, I was able to race a brand new Chassis this season.

Besides grabbing two feature wins, I was able to Finsh as the Season Champion at Madison, South Dakota.

Your car took a licking and kept on ticking.

I am very happy with the fit, the quality of the welds and performance of XXX Chassis.

The king pin bosses on the front axles impressed me very much, no looseness at all after a full 3 night a week season of rough and tumble action on the short tracks.

The quality and the pricing structure made the difference between racing with new equipment or old equipment.

Thank you XXX for your support of the "little guy".

Hi I use to race the 00 IMCA sprintcar, I was severly injured from a fire aqnd sustained 3rd degree burns from my waist down. I am planning on trying to do some part time IMCA racing this year. Many of my family members and friends order parts from you as you sponsor our sprintcar program. I just wanted to thank you for providing us with cheap but nice quality parts. At our racing banquet my cousin won a xxx free front axle, we all thought that was really cool. Its really cool to have a dedicated sponsor like xxx to give away parts like that and help support us. Thank you I can't wait for the 2009 racing season to begin.

Everyone at Triple X has done their homework on these cars. I have raced and put together many different brands of cars and none have gone together better or worked as well as The Revolution Chassis. When you make changes to the car it really responds. Triple X has an awesome race car and their entire staff is great to work with.

Thank you for building such a great car.

Matt Wasmund
www.wasmundracing.com

All the parts look real great and very reasonably priced. We look forward to doing business with you in the future!!!

LOVE YOUR PRICING. PLEASE BUILD NOSE AND TOP WINGS SO WE CAN SAVE MONEY THERE TOO. ALSO OWN A XXX CHASSIS VERRY PLEASED WITH THE WELD AND QUALITY. GREAT WORK AND THANK YOU

Just wanted to let you know we won Saturday night with the SCONE 360 series at the Legion Speedway mid season track championship.  We won our heat by a half a lap and the A main as well... Car was hooked!!!!  Thanks Triple X race Co. for making me a champion and building a great race car!

I have been using alot of xxxraceco products and they stand up to everything even in a crash the parts bend and twist but do not break even at the welds which makes me feel great about their products.
Thanks XXX for the help and great products.

Nickel Plated Front Axle: Easiest front axle build ever!  I have never put a front axle together this quickly with so little hassle.

I was impressed when the kingpin bosses were already reamed and the pins fit perfect. Just tight enough to keep the pin from turning in the axle and no need to break out the Big Hammer. Was even more impressed when I went to shim the spindles and the bearing with the heaviest two shims one each side fit perfectly. Never had that happen before.

Your Nerf bars fit right on my Maxim and your steel drag links/tie rods are high quality.

You guys are paying attention.

I bought a used triple x frame from a friend of mind that ran ASCS. Over the past 10 years he has ran nothing but Maxims, and said he will never go back because your frames have the best price, and are the best, hands down!.

I am really shocked, that I received and email reply! In the past, I have ran Maxim and Eagle cars and have never received an email response from them! My next new frame will be purchased from you, as you care about anyone racing your cars.

We received our chassis and parts in excellent condition. The workmanship in all of the parts including the fiberglass and metalwork are very good. The shipping protection was exceptional with no scratches or dings to any parts. The shipping costs to PA were very reasonable.

S.E.H Motorsports

We found XXX parts to be some of the finest we have ever seen and priced for the teams on a budget. The have GREAT service after the sell.THANK YOU Triple X for you suport of us New Mexico Racers

Sprinter 7T

Well Jeff sure liked the frame. He was going a lot faster with this frame. We were asked how will it hold up in a crash. We said it was strong and have a lot of faith in the frame. We put it to the test last Saturday night. He crashed full speed they say it was one of the worst crashes at Cottage Grove. I'm ordering the video and will send you pictures from it .The frame did it's job and my son walked away with no injuries. The frame was bent beyond repair. It broke the rear axle in 3 places, put a huge dent in his seat and all that was salvaged from the car was engine, steering, front axel, left wheels & tires. It did brake the shock mount off and the front cross bar broke. I will send pictures of the frame. It is an excellent frame with very strong welds. We will be buying 2 more frames from Brian Crocket this spring and start again. We thank you for bringing this frame to the racers.

Powell Racing

Thank you so much for sponsoring NMMRA this year.  My husband took 2nd place in points.  We are all real impressed with your company.  We are going to order some t-shirts, you should think about having womens styles I know I would wear it!  As a wife of a sprint car driver, I appreciate the lower prices your company offers and the well made parts to keep them safe out there.  Thanks again XXX!

Stephens Racing

Triple X products and services are the best out there.  I flipped my sprint car last weekend and had to buy a bumper kit, radias rods, rod ends and some other parts.  Not only did we get our parts in time to race the next week, we went on to WIN with the first class TRIPLE X parts to put my car back together.  Thanks Triple X for helping me be the best of the pack.  We couldn't have done it without you.

KC Racing 75c

Triple X products are great.  We now have your front axle, bumpers, kick bars, wing tree and jacobs ladder on our car due to a few mishaps this season and everything is top notch.  Service and price can't be beat, really like the new things you keep coming out with and the coupons for top 3's are great!

Great products at a great price however took a bit too long to fill and ship out my order. Order placed Monday morning and not sent out until Wednesday evening. With shipping time, order did not arrive in time for weekends racing schedule. Orders should be filled and shipped same day. Will allow more advance time in the future.

Grabill Racing

I was very pleased with the workmanship of the lightweight axle I purchased from you folks.  All parts of it was first class.  When I installed it, to my surprise the castor and toe in were perfect, requiring no adjustments on my part!  I will be ordering more from you folks as needed, and my budget permits.

Sluka motorsports 360 sprint car #29

You guys build an awesome wing tree. Unfortunately I just destroyed it so I'll have to buy another, FROM YOU. Thanks for the great parts.