 |
|
 |
 |
| |
| |
The information provided below
is standard setup details for the
XXX Sprint Car
Chassis. If
more information is needed than what is supplied
below, please email
tech@xxxraceco.com.
We'll be happy to answer your questions. |
|
| |
|
|
| |
Radius Rods |
|
| |
| |
87/40 |
88/40 |
| Left Front |
22
1/2" |
23
1/2" |
| Right Front (2) |
23" |
24" |
| Left Rear |
23 1/2" |
23 1/2" |
| Right Rear |
24" |
24" |
|
|
| |
|
|
| |
Steering Rods |
|
| |
| |
87/40 |
88/40 |
| Tie Rod |
45
3/4" |
45
3/4" |
| Drag Link |
49" |
50" |
| Panhard Rod |
18 1/2" |
18 1/2" |
|
|
| |
|
|
| |
Drive Line |
|
| |
| Drive Shaft
(Internal Coupler with spring) |
29" |
| Drive Shaft
(Internal Coupler with spring, DMI U-Joint) |
28 3/4" |
| Drive Shaft
(External Coupler with spring) |
25 3/4" |
| Drive Shaft
(External Coupler with spring, DMI U-Joint) |
25
1/2" |
| Torque Tube |
26 1/4" |
|
|
| |
|
|
| |
Front End |
|
| |
| |
87/40 |
88/40 |
| 2 1/4" Axle. Axle
(Back) to Motor Plate (Leading Edge) |
45 7/8" |
46 7/8" |
| 2 1/2" Axle. Axle
(Back) to Motor Plate (Leading Edge) |
45 3/4" |
46 3/4" |
| Right Front
Torsion Tube (Center) to axle (Center) |
14" |
14" |
|
|
| |
|
|
| |
Rear End |
|
| |
| Motor Plate
(Leading Edge) to Rear Axle (Leading Edge) |
38 5/8" |
| Motor Plate
(Leading Edge) to Rear Axle (Center) |
40" |
| Jacobs Ladder
(measured down diagonal) |
13 5/8" |
| Left Rear Torsion
Arm (Center) to Birdcage Bolt (Center) |
16
7/16" |
| Right Rear Torsion
Arm (Center) to Birdcage Bolt (Center) |
14
11/16" |
|
|
| |
|
|
| |
Torsion Tubes |
|
| |
| Bushing (Wall
Thickness) |
0.095" |
|
|
| |
|
|
| |
| |
| A-Frame Seat Spud
spacing |
7.0" |
|
|
|
|
| |
|
|
| |
Shocks |
|
| |
| Left Front |
6" (7" may work
depending on ride height, track, class, etc) |
| Right Front |
7" |
| Left Rear |
8" (9" may work
depending on ride height, track, class, etc) |
| Right Rear |
9" |
|
|
| |
|
|
|
| |
|
 |
|
